Tuesday, August 17, 2010

Thump thump thump! Tiger cub purrs after a long cat nap!




Of all my motorcycles, the one I will never part with is the '61 triumph cub my father built from spare parts a few years before his passing. All his cycles were sold when his cancer worsened except the cub - which he gave to me. If you're unfamiliar with the cub, it's a 200cc single cylinder (aka a thumper due to the single cylinders signature sound). This was the successor to the Terrier which was made up until the mid 50's. The cubs were produced from 1956 to 1968 and were available in several different versions, including scramblers and road bikes. The bike picture above is a scrambler, with it's high pipes and on/off road tires. While street legal, they were geared differently than the road bikes to provide better torque in off road conditions.

Long story longer, the cub was built out of parts my dad collected from swap meets. She's a loose replica of a tiger cub he owned while in college during the early 60's. It has pieces of this and that on it, so she's by no means original as the factory would have sold it, but all the wiring and pieces were carefully put together to make a tidy little bike.... but she's a bitch to start! I had her running earlier this summer but then she stalled and wouldn't restart.

Today I got at it again, but couldn't get her to fire up. I fiddled with the carb for a bit, sprayed some contact cleaner on the points, spent an hour trying to kick start it with no luck. Bump starting in first gear proved impossible since it's so light, the tire just skids when I pop the clutch. I finally realized it might be easier to bump start her in second gear. This was the ticket. After three attempts she sprang to life. After that I adjusted the carb some more and got her purring like I kitten (or cub if you will). I rode around the neighborhood and even turned her off and restarted several times. Turns out the cub just likes to be ridden and sitting for extended periods makes her cranky. I love this bike, and I look forward to taking her off road and doing some trials type riding. I promised my dad that I'd enjoy this bike and I plan on making good on my word.



Thursday, August 12, 2010

Project 72 Bonnie update

After making the horrifying discovery that the entire inner frame (where the oil is contained) was loaded with sand blasting grit and old oil, I put the 72 Bonnie on hold and went out and bought the 2010 Bonnie. Since then, I've been putting many miles on my moto and not worrying about wrenching on the wretched wrecks.... well that may be a bit harsh, but broken bikes aren't fun when you work long and hard on them and they stay broken, you know?

So with the 72 partially in pieces, it has remained in my old garage, the oil chamber soaking in a powerful degreaser. I moved more than half of what was in my old garage to my new shop, but it still seems like theres no room to work. How'd I ever fit everything in here?

(l-r 61 Triumph t-20 Cub, 74 Vespa 150v Sprint, 72 Triumph t120 Bonneville, Prewar Western Flyer bicycle.)

Below is a little tool I rigged up using a long plastic bristle brush with the handle clipped to fit a drill. I periodically have been using this to scrub in the inside of the frame to clean the oil and sand. I had the front wheel off the bike with the frame leaning forward to allow the degreaser in the upper oil chamber.


Today I dropped the oil filter and drained the degreaser out of the frame. All that black you see is oil stained blasting grit. There was quite a bit of it.


Above you can see where I wiped my finger. thats all sand.


Safe to say I will be needing a new filter. Even when I am satisfied with the cleaning of the frame, I need the best filter available to keep any rogue grits of sand from working there way into the engine.



I have a way to go on this bike, but things are moving again. I'm putting the front wheel on the bike so I can roll it over to the new shop and get it on the lift. Next step will be taking apart the top end to see why one of the push rods is stuck. Seriously.

Sunday, August 1, 2010

rode to the beach and back (lived to tell the tale)

My wife and I went to the beach this weekend for a night and I decided that riding the new Bonnie was probably going to have to be mandatory. I was right. I rode across the Delaware River via the Commodore Barry Bridge and continued through farm lands and Pine Barrens for an hour and a half till I reached the coast line. The engine had zero miles, so technically I'm still breaking it in, but I couldn't resist taking a racing stance (hugging my tank) and seeing what'd she's do. I didn't break the magical ton but I was shy just a few mph before I ran out of traffic free straight away. The rest of the ride was pretty laid back.

Nothing like a 7am bimble through the back bays of South Jersey.
View from the drawbridge heading to Strathmere PA. I ran into some old family friends in Avalon and ended up surfing for a while. This could be considered a perfect morning.

Wednesday, July 28, 2010

Been a while since I've posted (good reason too)


I've put down the wrench for a moment and bought myself a 2010 Triumph Bonneville (I parked over I nice big oil spill to make the Brit Iron look more authentic).

Anyway, I got tired of broken down bikes consuming my life and I need to ride while the weather is good. The Triumph is still coming along. I sorted out the front forks but discovered the entire inside of the frame is lined in sand (from sandblasting without taping off the openings) and old oil. It's soking in degreaser and I'm waiting on a part washing wand to try to cleanse the guts before I go any further. In the meantime I'm enjoying my new ride immensely! Thanks to Buzz and the guys at Triumph Manayunk for hooking it up and being Stellar dudes.


Saturday, June 26, 2010

Front fork problem


I pulled the front end apart since all the rubber bushings were shot (handlebar eyelets and headlight mounts). I also wanted to add some gaitors to the forks. Well I have no idea if these were assembled correctly to begin with but the one spring is way high

Uploaded by www.cellspin.net


Sunday, June 13, 2010

Triumph preunit engine project

Just what I need, another project! I just couldn't resist this 650 TR6 Triumph engine. I just need a gear box and a couple covers and she's complete and ready to drop into a Featherbed frmae... or a triumph rigid frame.... or something.......
As you can see below the timing case has a few broken bits. I could possibly have a machinist fix this...
...and this, although I am keeping my ebay-eyes open for a replacement.
Still not sure of the year. Any input?



White Smoke, Oil Leak and a broken down Beeza....

Well bad news for the Bleeding Beeza. I fired her up this morning and as I rode down the street I noticed a massive cloud of white smoke trailing behind me. I made it to my other garage (just a block and a half away) and this is what I saw:
Yuck, look at that sludge....
Looks like a hole in the inner timing case. I just can't wait to open her up and see what did that little number.... Oh well, I've been meaning to overhaul this motor from the bottom up anyway. I just hope I can get the Bonnie finished VERY soon.