Saturday, September 18, 2010

BSA ready to reassemble

I bead blasted the rust and what little paint was left on the triple trees. I then hit them with two coats of diamond clear satin finish. They are hanging in the shop overnight to cure. I rebuild the front forks with new seals. The timing cover is all sorted out and ready to go back together. Just need to spend an hour to put it all together, and maybe another half hour of adjusting/timing and I'm all set.



- Posted using BlogPress from my iPhone

Location:West Chester,United States

Saturday, September 11, 2010

BSA find on craigslist. Small bike in a small world.

As a certified vintage motorcycle hoarder, I find myself constantly browsing sites like Craigslist and Ebay in search of great deals. Usually I find nothing, but from time to time I run across something interesting that I simply must have. Friday night was one of those times.

The caption simply read BSA parts, Downingtown PA. Now I grew up in Downingtown and it's only 15 minutes away so I checked out the photos and discovered a BSA frame, some tanks, a wheel and some other stuff that was hard to make out. The price was right so I responded.

I made a deal over email and arranged to pickup the unidentified pile of parts the next morning. Oddly, the address given to me was right up the street from the house I grew up in. I fantasized that maybe this was left behind in my dads garage when we moved (17 years ago), finally put out for trash by the current owner, then trash picked by a neighbor who figured they could make a quick buck on craigslist. This turned out to not be the case, but it was a neighbor who lived up the street from us, who was into motorcycles. When I showed up, it was the wife who was selling these things. She recognized my make from the email and was also curious to see if it was the same Matt Smith that grew up on the corner. We had a nice chat for a while before going into the garage to see the pile of brit iron. Included in the sale was a 1951 rigid b31 frame with what appears to be the correct gas tank for the bike. An oil tank which I have yet to identify, a rear tire that looks british, but I'm not sure if it went to this bike or not, a BSA two passenger seat that looks fairly decent (looks like it would have gone to the plunger frame version of this bike) and lastly an old fiberglass racing fairing which I think needs to be painted up for Team Smoke and Throttle to be proudly displayed in the S&T headquarters (my garage).
One BSA badge still intact. Surface rust and only a few minor dents to pull. A very good candidate for restoration.

The B31 Rigid.
Race fairing from who knows what.
Oil Tank, still unidentified. Maybe from the B31?
Rusty hub, but it will clean up nicely. Looks like a standard Dunlop hub.
BSA seat, B series> Looks similar to the goldstar seat, though they were probablky the smae or very similar to the b-series anyway.
Couldn't resist making a mock up. The front tire (leaning against a gallon sized can of WD-40) is from my 71 Thunderbolt, but I like how the front and back wheels are similar sizes.
\
Now I need a motor. Someone suggested a J.A.P. side valve. I like that Idea, though I think a BSA B33 500 would be easier. No rush, I have to bikes being rebuilt and a 58 Triumph project to think about. So in the meantime, I will continue searching out and hoarding parts for my various projects (both existing and future ones).

Wednesday, September 8, 2010

BSA fork rebuild part 1


Pulled the forks apart and I wasn't surprised to see water oil and mud along with the obvious bad seals. I put new rubber on everything that needed it and it's going back together when I get a chance to sneak out to the garage next.

Monday, August 30, 2010

BSA is getting the attention she deserves

As of right now I'm waiting on a new inner timing cover seal after replacing the gear shift selector. I drained all the oil while I was at it and cleaned out the selvedge trap.

Since I can't do much until the gasket comes, I decided to pull the font forks since they were leaking gunk from the fork boots when compressed. I opened up the fork oil drain plugs and found that one was empty while the other contained just a small amount of sludgy oil and water. Rebuilding forks is not my favorite task, but I well sorted front end is key for performance. Believe me, the bike rattled and bottomed out so badly before I was scared to go over 50 mph. I am hoping to have the bike back on the road before the season is over. Cosmetics will come later on. Mechanics first!

Friday, August 27, 2010

Despite the beezas oil leak....



It feels good to be wrenching on good old Brit iron again. Let the challenges begin.

Uploaded by www.cellspin.net

Back to the beeza


A while back my 71 thunderbolt dumped a ton of oil from a hole in the outer timing case while blowing white smoke from the pipes. Well it looks like it's coming from the ignition plate which probably means a cam seal. Not good as far as I know.

Uploaded by www.cellspin.net

Garage has been decluttered!



Spent all afternoon cleaning my shop. I can finally move around in here. I still have a ton of stuff to move in from the old shop, but it seems less daunting of a task now.
Uploaded by www.cellspin.net