Friday, November 5, 2010

51 Speed Twin winter project.

After sorting out most of the issues with the BSA thunderbolt, I decided it was time to get into the 51 Speed Twin. The ugly seat had to go, so I ordered a vintage 60's era Bates Style solo seat and a repop pillion pad. I need to get the fender stays for the rear before that goes together. The front wheel was in bas shape, so I pulled that off and polished the rim before adding a new Dunlop k70 (3.5x19). The forks bottom out, so I dismantled them and found some pretty skanky fork oil inside. Waiting on some parts, but I'm trying to decide if I want to keep the 19" front wheel or go 21 with an Avon Speedmaster and drop the forks a couple of inches similar to the Salt Ghost. I need to play around with this for a bit.




Sunday, October 17, 2010

Timing is set. Rode bike for the first time in 5 months!!

It still leaks like a sieve, but I'll address that later. Just need the new levers and I can pull those big switches off the handlebars for a minimalist look. There will be a small switch to kill the motor and switch from low to high beam. when I wire that up, I'll also pull the rocker cover off and try to seal it up better, then mount the gas tank with new rubber and mounting bolt. Hopefully that will be the end of the major overhauls for this bike - for now.


Saturday, October 16, 2010

BSA wired to run!

After a short somewhere in the old harness melted the wires together, I decided to start from scratch using mini sealed 6v batteries wired in series to eliminate the bulky 12v battery. This allowed me to tuck everything neatly under the seat on a wiring platform ala cafe racer style. I rerouted all the wires to run behind the frame so they're out of sight. The bike runs now, but I haven't wired the headlight or stop light yet, that's next. First I need to sort out the timing.

I picked up a couple of shop chotchkies at a local garage sale for a buck. Old Americana eagle painting, and a beat up framed Marlon Brando poster from the Wild One. Nice, my garage is gaining soul!

I also took the Triumph for a fall race through the back roads of west Chester with my buddy Justin (who just finished up his 1974 CB450f cafe racer. More on that bike soon.
I hit a few bugs along the way. Always a good sign of a fast ride...


Monday, October 11, 2010

under the seat wiring board

I cut out this 1/4" pice of plywood to fit directly under the seat of the BSA. The metal brackets will bolt directly to where the battery box used to go. The slim, sealed battery will sit on top along with the Boyer ignition box. The coils will be mounted horizontally to the bottom along with the Boyer power box allowing them to be air cooled. The whole thing will eliminate the need for the ugly OIF side covers that came with this bike. I will have this done in the next day or so. Check back soon!

Saturday, October 9, 2010

BSA has new wiring and runs again!

I mocked up a new wiring system that eliminates all the unnecessary features I don't use (blinkers etc...) which will allow me to tuck everything under the seat cafe racer style. The timing needs adjustment, but she starts right up! I just need to make a platform to fit where the battery box used to hang to mount everything.



- Posted using BlogPress from my iPhone

Wednesday, September 29, 2010

Periscope DOWN!

Had to lower the head light. It just looked odd sitting up so high. I made a temporary bracket out of an old copper pipe that I hammered, drilled and ground into shape.

I kinda like the way it looks but it is only temporary. Kind of steam-punk don't you think?



I mocked up the rear fender which I'm making steal fender stays for this week. More to come soon...

Tuesday, September 28, 2010

New toy, 1951 Triumph 5t Speed Twin Bobber





Every once in a while, a rare motorcycle pops up for sale in my area that is just too good to pass on. AD: 1951 Triumph 5T "Bobber" in running condition with T-I-T-L-E. Clutch sticks fenders included but no fender stays.

I've been collecting parts to build a 58 650 rigid for a while, but it seemed the more I hunted and gathered parts, the further that bike seemed like reality. Plus I have never owned a Pre Unit bike that was complete, so I really had no reference as to how they fit together. This cycle seemed like the perfect bike for what I needed (don't they all though?) it was basically running and complete. a little fiddling with the cosmetics and I have a really trick classic motorcycle - plus I have a reference for my 650 build.

As for this bike, I plan on making some temporary rear fender stays (unless they turn out nice, then they may become my KUSTOM stays! The front tire has to go (it has square edges, like a car tire, in fact it might be a car tire), it just feels dangerous, and not in a good way. I kinda dig the headlight, it looks like it might have been from a Ford model T, but I feel like it's way too high, kinda like a periscope or something. I'd like it to be lower than the bars. I also have a set of lower bars that I think will make it look cooler. I like the tank, not sure what it's from, but its bolted on the frame nicely and its free of dents and rust. I'm not married to the color. It looks like a rattle can, albeit decent rattle can paint job. But that will probably be my last step.

Today I'm going to give her a good look-over, check to see if theres any wobble in the wheels (it felt wobbly) change the plugs (it kept cutting out on the left side, though it has been sitting for 5 years) and I'm making a list of things I need to order like new front brake cable, clutch cable and While I'm at it, throttle cable.

Then, out comes the engine brite aerosol, and a can of Mothers and thecleaning begins!

Unless I happen across a pile of 51 5T parts for dirt cheap, I doubt I'll be restoring it to showroom condition. My minds eye see's this bike as something that one of Johnny's crew might have ridden in The Wild One.

Matt